On-Site Precast Concrete Manufacturing for Infrastructure Projects
We establish and operate complete precast production units at your project site — plant, moulds, manpower, curing and quality control — so large projects get a steady, factory-grade supply of paver blocks, kerb stones, tiles, fly ash bricks and RE wall blocks without the cost and breakage risk of long-distance transport. We also lay and fix what we manufacture.
- Production at the project site — not hundreds of kilometres away
- Machine-made consistency with batch-wise quality control
- Laying & fixing of all products by our trained teams
Why large projects manufacture precast at site
Far less transport damage
Products move metres, not hundreds of kilometres — sharply reducing edge damage and transport-related rejection at the work front.
Lower landed cost
Long-distance freight is a major share of precast cost on big volumes. Onsite production removes most of it.
Supply matched to schedule
Production ramps with your work front. No waiting on distant plants, transporters or market stock.
QC you can walk to
Curing, testing and inspection happen at site, in front of your engineers — full traceability by batch.
Read more about the model on our on-site precast manufacturing page, or see how the mobile precast plant is set up.
Precast concrete products for infrastructure
Every product can be manufactured at our unit or produced onsite at your project — same machines, same moulds, same quality system. Supply only, or supplied and laid by our own fixing teams.
Paver Blocks
Interlocking pavers per IS 15658, M30 to M60 — including heavy duty grades for container depots, ICDs and ports.
View paver blocks →
Kerb Stones
Kerbs, channels and edging per IS 5758 for highways, urban roads and medians — cast onsite, fixed to line and level.
View kerb stones →
Chequered Tiles
Slip-resistant tiles per IS 13801 for footpaths and platforms — also used as cable trench and route protection covers.
View chequered tiles →
Fly Ash Bricks
Machine-pressed bricks per IS 12894 — dimensionally accurate, eco-friendly and economical at project scale.
View fly ash bricks →
RE Wall Blocks
Reinforced-earth wall blocks for flyover approaches and embankments — cast to drawing in steel moulds, produced beside the structure.
View RE wall blocks →
CC Solid Blocks
Concrete masonry blocks per IS 2185 for boundary walls, structures and general masonry at large sites.
View CC solid blocks →Pavement Repair & Re-laying
We also restore existing paver pavements — sunken portions, opened edge restraints, uneven surfaces — including pavements laid by others. As per IRC:SP:63.
From site visit to handover in six steps
Project assessment
We study your quantities, timeline, space and utilities, and propose the right plant configuration.
Plant setup at site
Machines, moulds, batching and curing arrangements installed and commissioned by our team.
Production & curing
Daily production runs with our operators, to the mix designs your project approves.
QC & testing
Batch-wise testing and documentation, ready for your engineers' and client's inspection.
Supply to work front
Cured, passed material delivered to the work front, in step with the site programme.
Laying & fixing
Our own teams lay and fix to line and level, compact, sand-joint and hand over ready for traffic.
Proven on demanding sites
A selection of the work our onsite model has delivered — from heavy duty port pavements to power plant infrastructure.
Jalna Dry Port, Maharashtra
120 mm M-55 unipavers per IS 15658 — manufactured, supplied and laid across the terminal.
Balmer Lawrie Container Depot, Visakhapatnam
100 mm brick-shape M-50 pavers laid to line, level and compaction across depot operational areas.
NTPC Sipat — road shoulders
Heavy 500 × 300 × 250 mm kerb blocks (~110 kg each) vibro-pressed onsite for plant road shoulders.
Quality your engineers can inspect at site
Approved mix designs, batch-wise cube testing with full records, controlled curing and dimensional checks — all done where your project team can see them.